Validating identity on a wireless network

Ok so I setup the router to only transmit wireless N and to use WPA2 only.

When I try to connect using the windows zero configuration utility it gets stuck validating identity.

validating identity on a wireless network-64

I tried this and when attempting to connect again, a prompt box appeared asking for a network key (also called a WEP or WPA key). It finds the router fine but stalls at \u0027validating identity\u0027.

After checking various forums, advice was to unclick the 'enable IEEE 802.1 authentication box in the router properties. But I have recently re-installed windows and now can\u0027t get it to connect.

If the box was checked, then that was why you were getting the “unable to find a certificate to log you on to the network” message because Windows is looking for one, but your wireless router is not setup for certificate security. " From: Upgrade to SP3 and you should be able to connect to your network.

I just installed a new Linksys ADSL modem/router at home.

I moved the selection tab to WPA2 only and keep the rest the same and no luck. Ok so I setup the router to only transmit wireless N and to use WPA2 only.

I moved the selection tab to WPA2 only and keep the rest the same and no luck.

I have seen this in the router properties (i.e - from Open to WPA), tried this, but then it wont connect at all. Help, my PC with Windows 10 won't shut down properly Since upgrading to Windows 10 my computer won't shut down properly.

I use the menu button shutdown and the screen goes blank, but the system does not fully shut down.

Let your router do pppoe and routing, it's really designed for that. It seems that currently, your computer is trying to create a pppoe session (which involves logging in, validating identity etc). Change the wireless settings to create a new wireless ssid that you have not used before.

Tags: , ,